If you are a homeowner based in Sydney, you are probably aware of the challenges that you have to face because of extreme weather conditions. The summer can get quite hot and you may have to go through a few heatwaves as well. Sydney winters can also be quite chilly, so you’ll probably need an effective heating system installed in your home as well.
When it comes to AC and heating systems, having the correct system for your house is the key to maintaining a balanced temperature indoors and you will also save a lot on energy costs. When replacing your heating and AC systems, there are a few common mistakes that you should avoid if you want it to provide optimal heating and cooling.
The 5 most common mistakes that homeowners make regarding their heating and cooling systems are:
1. Installing Second-Grade Products
One of the main reasons why your heating or cooling system might be malfunctioning is because the contractor may have used low-quality products in the installation process. While it may be a bit cheaper in the short term, it will certainly cause a lot of problems in the long run.
It’s important to inform the contractor that you want original parts and products to be used as this will save a lot on repair costs later on. As with most mechanical and electrical systems, getting a high-quality product once is better than buying lower quality, cheap products that need to be replaced more often.
High-quality products will also perform better and will use less electricity than cheaper or older models. Modern advancement in technology also aims to reduce the power usage of a product, which is why you’ll see that most of the newer models have eco-friendly power ratings. This is especially true when it comes to installing AC systems.
Another factor to consider is that contractors often use low-quality parts to install the heating or cooling system and then charge you a premium price, in order to increase their profit. You should always do proper research before choosing a contractor.
In many cases, you may have bought the best AC, but it still gets damaged more often due to low-quality parts. A low-quality pipe is more likely to experience a leak than a high-quality one. This could result in significant costs to repair the pipe and replace the gas. In the long run, high quality is always cheaper.
2. Choosing the Wrong System
This is another major blunder that many homeowners make when choosing a heating or cooling system for their house. Never make the decision of which system to choose based on a few videos or personal estimation. Always have a professional contractor view your property to give you advice on what size your heating system or AC should be.
By installing the wrong sized system, you will have to face problems such as inadequate cooling, and you’ll be wondering whether the system is damaged. In such cases, the AC may be operating optimally, but it is not designed for the size of your room, so the cooling will be lower.
While you do not have to let the electrician or expert decide on a particular model, you should at least get a rough estimate of the size that you require, so that you do not buy the wrong sized system.
3. Not Sealing Openings Properly
If you are going to install an AC system or heating system, you should make sure that the air ducts, windows and other openings are properly sealed. The same goes for installing heating systems as well. Any unseen openings will result in improper cooling or heating and you won’t even realize that the system is functioning below its proper range.
Another issue with unsealed openings is that they let the warm or cool air escape from the room, which means that you may have to put the system on a higher setting to achieve the same temperature. This could result in power wastage and you’ll be surprised to see a higher electricity bill as well.
4. Choosing the Wrong Contractor
When it comes to installing a heating system or AC in Sydney, then you should make sure that you get it done with a reputable contractor. This will ensure that your system is installed properly and may prevent it from getting damaged in the future.
There many reputable companies, such as Off Tap Plumbing Pty Ltd, that are experts in installing heating systems and AC systems and will provide you with a satisfaction guarantee. They are also helpful in giving you the right advice regarding what size your system should be to function optimally.
A good contractor will also use high-quality parts to ensure that your system does not get damaged quickly. They will also provide you with advice on the energy consumption and effectiveness of different brands, which will help you make a better decision.
5. Not Getting a Warranty
Nowadays, all high-quality brands provide between a 5 to 10-year warranty on the main components of heating and AC systems. This means that you can get free repairs if your system gets damaged within this period. However, some salespeople do not inform the customer about this warrantee, which means that you will be essentially paying for free repairs.
Always make sure that you get a properly written warrantee with an official seal from the service provider so that you can have peace of mind knowing that the systems main components are covered for a few years.
A good warranty will also include at least a year of free repairing on small pats and other components of the system. It will also come with a performance guarantee, so you can hold the company accountable if your system does not operate properly.
If you are a Sydney homeowner looking to replace your heating or cooling system, then you should take care to avoid these common mistakes in order to save money in the long run and get the best quality system.