How to Drill into Concrete Wall – Complate Guide

When we are up for drilling into the concrete, there often end up damaging the wall without making the right holes. 

So, today, we will go through the processes of how to drill into concrete wall without making any mistake. 

Advertisement

Check this method out; this is the easiest one for concrete walls so far! 

Method of Drilling into Concrete Wall 

Step 1: Preparing the Drill 

First, you have to get a hammer drill that can work on the concrete wall for you. In terms of going for the small holes, you can use the regular drills. But for the tougher works, always rely on the hammer drills or rotary hammer. 

Then, check the manual and instruction book of the drill to know about it properly. You have to place the right drill bit in this situation. Make sure the drill bit you use should be a high-grade quality masonry drill bit

Go through all the top drill bits for drilling and then choose one from them. It is a good idea to pick up the carbide-tipped masonry bits for this work. Check the length of the bit flutes. 

Make sure they are long enough for the holes you are planning to drill. After this, you have to check the right depth for your holes. 

There will surely be a depth control bar or depth setting. Have a look at that. For hanging light objects, 1 inch is enough but for heavy-duty projects, you might need longer screws. 

Step 2: Holding the Drill 

In this situation, you are already prepared with your drill. You can start your drilling process if you are experienced enough in this field. However, if you are a newbie, you have to learn how to hold the drill properly to get the right holes on the concrete walls. 

First of all, hold the drill with your hand just the way you hold a gun. Just like you keep your index finger on the gun’s trigger, keep your index finger in such a situation on the drill. In some drills, there isa separate handle for holding. 

If your drill has one, make use of it. If you do not have it, no worries, take your other hand on the back of the drill and place it there. 

Step 3: Making Small Holes

Now that you are ready, you have to prepare the wall for the drilling process. Take a pencil and make marks on the wall. 

Make sure your marks or dots are exactly at the point where you are going to drill the holes. Now, it is time for you to start drilling by making small holes. 

If you are knowledgeable, you might say these holes pilot holes.  Keep your drill on the dots and drill a bit keeping the speed low. Make sure the first holes you make are shallow. 

Step 4: Powering the Drill 

Once you are done with making pilot holes on the concrete wall, your holes are ready to be drilled like a pro! 

Some drills include hammer function and if you have one, go for it. Hold the drill at a perpendicular angle to the wall surface keeping the drill head on the pilot hole. 

Start drilling but do not provide force, be firm. Slowly, increase the speed of the drill and provide a bit of force. Your grip on the drill handle should be firm. 

Step 5: Taking the Drill out 

When you will drill continuously, there will be concrete dust. You must get them out. For this, all you have to do is pull the machine out after using it for a period. 

Give the wall 15-20 seconds and the dust will fall. Now, you can put the drill inside again for drilling. 

Taking out the drill periodically and giving it a break by switching off is necessary for keeping the machine’s motor work better. 

Step 6: Using Masonry Nail 

Even if you are a seasoned drill user, your holes might not be always perfect. You have to break through obstructions when the drilling is not perfect. 

If it doesn’t go as expected, you have to insert a masonry nail inside the hole. Then you have to hammer it for breaking the concrete. Now, you can insert the drill bit again for drilling. 

Step 7: Blowing the Dust 

Removing the dust from the concrete holes will help you strengthen the concrete anchors. You have to squeeze a can or bulb of compressed air so that you can take out dust from the concrete hole. After this, vacuum it properly. Now, you are done with the perfect holes! 

Wrap Up 

See, drilling holes on the wall is not too though, if you are worried about how to drill into a concrete wall, these pieces of information will help you do your job! 

Don’t forget to write to us about how you drill the concrete? Which machine do you use? Share it with us.

Top tips for the safe removal of asbestos in homes and commercial properties

Are you looking for top tips for the safe removal of asbestos in residential or commercial properties? If so, then you have come to...

Tuscan Kitchen Overview: Should You Get One?

Tuscan kitchen styles come from the Italian region with the same name: Tuscany. Lately, the style has gained quite a bit of popularity in...

Grand Opening: An Interior Door Installation Guide for Every Room

What do you do with your charming pre-owned home when the previous owners never got around to updating the eclectic mix of interior doors?...

Shopping for a Microwave? Here’s 5 Elements You Need to Know

One of the appliances that are indispensable in this modern, digital world is a microwave oven. It proffers convenience when it comes to reheating,...

What You Must Know Before Cleaning With TSP

TSP stands for trisodium phosphate and is an inorganic chemical found in various places. Like with any chemical cleaning agent, there are...

Portable Carpet Cleaner

Kids, pets, alcohol, and other extracts can turn your pet into an ugly mess. Kids and pets will follow dirt onto your carpets without...